• Industry Webinars

    Upcoming Webinars

    Engineering Safety for Autonomous Cars

    November 19, 2019
    Automotive IQ/ANSYS

    Replace years of physical testing with simulations that replicate autonomous vehicle performance in a virtual environment with physics-based simulation using embedded software that is critical for success in developing autonomous vehicles.

    Go to Webinar

    How to Validate the Vehicle Behavior and Passenger Experience in Real-Time without Sacrificing Accuracy

    November 20, 2019
    SAE/Dassault Systemes

    Best-in-class real-time vehicle dynamics technology, coupled with high-accuracy tire modeling and high-end dynamic simulators, understand vehicle behavior as if you were actually in the vehicle.

    Go to Webinar

    How to Design a Vehicle Security Operations Center (VSOC)

    November 20, 2019
    Automotive World/Upstream

    Automotive companies have realized that there is a pressing need to design and develop a customised SOC designed for detecting and responding to threats that target their connected car and peripheral services—known as a VSOC.

    Go to Webinar

    How to Effectively Estimate Parameters for Battery Modeling

    November 21, 2019
    SAE/COMSOL

    The choice battery modeling approach depends on the need for accuracy vs computational speed. Fit the model output to experimental data considering the level of complexity and the number of parameters to assess.

    Go to Webinar

    Connected Data Logging in Autonomous Cars and Analytics for the Automotive Industry

    November 25, 2019
    Automotive World/FEV

    Selection criteria of a data logger solution for the acquisition and processing of vehicle and sensor data using the example of a typical data logger evaluation, with emphasis on the importance of acquiring time-synchronous and highly precise log data from different types of vehicle sensors.

    Go to Webinar

    From Mechanical to Solid State LiDAR

    December 11, 2019
    Autonomous Vehicle Technology/Hamamatsu

    LiDAR provides high-definition 3D information of vehicle surroundings up to ~200 meters. This webinar explores technical aspects of automotive solid state LiDAR - a specific design that does not contain any moving parts.

    Go to Webinar

    Metal 3D Printing

    December 12, 2019
    SAE/Renishaw/Protolabs/Zeiss

    The technology of 3D printing is progressing steadily in metal and is enabling users to print parts directly to more than a dozen different primary metals and alloys, bypassing the step of making plastic prototypes first.

    Go to Webinar



    Past Webinars

    How Does Swarm-Based Open Architecture Approach Shape the Future of Mobility

    Available Until: November 2020
    Automotive World/Elektrobit

    This webinar will will discuss how Swarm-based open architecture for in-vehicle infotainment (IVI) systems takes the industry one step closer to this modular and scalable mobility future.

    Go to Webinar

    Copper-to-Aluminum Joining for Li-Ion Battery Connections

    Available Until: November 2020
    Charged EVs/Materion

    Learn about mechanical and electrical performance in a copper-to-aluminum bond, including geometric and metallurgical considerations, electrical resistivity, mechanical characteristics and projected life performance of intermetallic boundaries.

    Go to Webinar

    BEV or ICE: Aluminum Extrusions and Tomorrow's Vehicles

    Available Until: November 2020
    SAE/AEC

    The drive to reduce vehicle mass continues. Engineers developing new vehicles not only have to strive for vehicle efficiency improvements but also offset mass increases from additional comfort and ADAS components.

    Go to Webinar

    How an MPC Approach can Handle Increasing Vehicle Complexity and Control System Challenges

    Available Until: October 2020
    Automotive World/Ricardo

    Introduces Model Predictive Control (MPC). This approach embeds a model of the system being controlled into an electronic control unit (ECU), which is used to predict system response.

    Go to Webinar

    NVH Simulation for Electric/Connected-Vehicle Development and Analysis

    Available Until: October 2020
    SAE/Tektronix/PCB Piezotronics/Crystal

    Electrification creates quieter vehiclesand requires more attention to noise, vibration, and harshness attenuation. This Webinar focuses on the latest trends in simulation to reduce NVH for vehicles with advanced propulsion.

    Go to Webinar

    Testing and Validating Automated Driving Systems via ENABLE-S3

    Available Until: October 2020
    Automotive World/AVL

    Although highly automated systems already exist, there is a lack of cost-effective, commonly accepted verification & validation (V&V) methods and tools, creating a barrier to the market introduction of these systems.

    Go to Webinar

    How Virtual Development Can Ensure Superior Vehicle Driveability

    Available Until: October 2020
    Automotive World/AVL

    Regulations for emissions and energy efficiency are forcing automakers to implement new technologies in new vehicles, with powertrain electrification a key strategy while customer demands for a superior driveability—are increasing.

    Go to Webinar

    E-Fuel Generation from Renewable Sources

    Available Until: October 2020
    Automotive World/AVL

    Renewable energy sources are less predictable than traditional energy sources. Chemical energy carriers, hydrogen and synthetic fuels, may be a partial solution for storing renewable energy.

    Go to Webinar

    How Virtual Development Can Ensure Superior Vehicle Driveability

    Available Until: October 2020
    Automotive World/AVL

    Regulations for emissions and energy efficiency are forcing automakers to implement new technologies in new vehicles, with powertrain electrification a key strategy while customer demands for a superior driveability—are increasing.

    Go to Webinar

    Alexa on the Road: How to Create a Voice-First In-Car Experience

    Available Until: October 2020
    Automotive World/Elektrobit/Amazon

    Voice-recognition technology is now capable of interpreting natural language, the prompt “I’m hungry” can lead the car to suggest nearby restaurants. Voice control of new vehicles will require dedicated expertise.

    Go to Webinar

    How AI-Based Predictive Maintenance Technology can Save Automotive and Suppliers Millions

    Available Until: October 2020
    Automotive World/BISTel

    Smart HMP applications can now perform real-time fault detection, fast and accurate root cause analysis and predict equipment issues before they occur.

    Go to Webinar

    Leveraging Advanced Manufacturiing Technologies for Automotive Lightweighting

    Available Until: October 2020
    SAE/nTopology

    In order for engineers to deliver high-performing parts at a fast speed, they need software tools that meet the demands of advanced manufacturing technologies while also reducing design bottlenecks.

    Go to Webinar

    How to Make Sure More Electronics in Autonomous Vehicles Won't Mean More Problems

    Available Until: October 2020
    SAE/Dassault Systemes

    Virtual testing of components’ electro-magnetic interference and compliance and signal and power integrity is increasingly critical to ensure the safe operations of these autonomous systems.

    Go to Webinar

    Using Portable Scenarios and Coverage Metrics to Ensure Autonomous Vehicles and ADAS Safety

    Available Until: September 2020
    SAE/foretellix

    To achieve production-ready AVs that can deal with all possible situations in a safe and responsible way, sufficient coverage metrics for driving scenarios execution are required. An important part of that is a common language to define test driving scenarios.

    Go to Webinar

    Impact of Autonomous and Electric Vehicles in New Product Development

    Available Until: September 2020
    SAE/Omnex

    Product design in autonomous and electric vehicles requires a product architecture of systems, subsystems, hardware, and software, as well as requirements management and the "Engineering V." This webinar explains the fundamental building blocks of autonomous and electric vehicles and the standards that govern them.

    Go to Webinar

    Autonomous Vehicles Sensors: How to Ensure They Work Well and Stay Clean

    Available Until: September 2020
    SAE/Dassault Systemes

    The sensors on self-driving vehicles and advanced driving assistance systems are the eyes that see in place of the driver, so exceptional performance in every situation is absolutely critical. That includes unpredictable weather situations, such as rain, water, mud, or anything that can obscure the outside world.

    Go to Webinar

    How to Handle Growing Complexity in Automotive Safety — Critical Multi-Core ECUs

    Available Until: September 2020
    Automotive World/Elektrobit

    Advanced ‘multicore’ electronic control units (ECUs) have been developed to process multiple functions simultaneously. However, growing safety requirements are increasing the overall complexity of such projects, and create significant challenges to project execution.

    Go to Webinar

    Infrared Imaging Technology

    Available Until: September 2020
    SAE/FLIR/Telops/Teledyne Dalsa

    Infrared imaging works by detecting electromagnetic radiation emitted from or reflected off the target material in the infrared range of the electromagnetic spectrum. It’s used in a variety of applications from scientific to military to industrial. This webinar delves into some of the latest advances in the art – and science – of infrared imaging.

    Go to Webinar

    Take Future Vehicles to the Next Level with C-V2X and 5G NR

    Available Until: September 2020
    Automotive World/Qualcomm

    With its evolution to Release 16 5G NR, C-V2X will go from targeting basic safety improvements through superior non-line of sight performance, to a technology that transforms next generation vehicles, autonomous driving and road infrastructure.

    Go to Webinar

    How HD Maps and ADASIS v3 Can Extend the Vision of Automated Vehicles

    Available Until: September 2020
    Automotive World/Elektrobit/TomTom

    To generate knowledge about the road ahead beyond the sensor range, an ‘HD horizon’ can combine HD map data with onboard sensors. This increases the robustness and range of the environmental model, and creates a safer and more efficient automated driving experience.

    Go to Webinar

    How Can Thermal Cameras Improve Automatic Emergency Braking and Save Lives

    Available Until: September 2020
    Autonomous Vehicle Technology/FLIR

    Thermal imaging, or the ability to passively detect and process infrared heat energy, requires no visible light to operate, providing an extra layer of data effective in seeing through fog, smoke, direct sun glare, inclement weather and at night.

    Go to Webinar

    How to Handle New Cable Requirements in Electrified Powertrains

    Available Until: September 2020
    Automotive World/TE Connectivity

    Increasingly stringent emission standards have led to the rapid projected growth of electric vehicles (EVs) hybrids (HEVs) and plug-in hybrids (PHEVs), which in turn will lead to the rapid demand for large gauge wires and cables. Wire harness manufacturers must take care to ensure quality connections in harsh environments.

    Go to Webinar

    Improving Energy Density and Performance of EV Battery Packs with Thermal Management and Coatings

    Available Until: August 2020
    Charged/Lord

    Thermal management materials and limitations in range, reliability and cost; benefits of cure-in-place liquid-dispense gap filler over a pre-cured thermal pad; flame-resistant coatings which can help mitigate damage in case of a fire event; and recommendations for tradeoffs on cost, manufacturability and performance.

    Go to Webinar

    Lightweighting with Composites and Plastics

    Available Until: August 2020
    SAE/Comsol/Intertek/Protolab/DSM/Eldon James/Toray

    The automotive and aerospace industries, are increasingly looking for innovations that reduce weight and improve fuel efficiency. Composites and plastics are being used more commonly for functional components that are lightweight and offer thermal and chemical resistance.

    Go to Webinar

    Material Solutions for e-Mobility

    Available Until: August 2020
    SAE/Henkel

    Battery design challenges include packaging and integration into the traditional vehicle architecture. There is freedom to create complex geometries from a wide choice of material to efficiently package and integrate into the vehicle structure. Bonding with adhesives improves production time and lowers costs to meet production demands.

    Go to Webinar

    Open Source Solutions in Autonomous Driving: Sefety is More than an Afterthought

    Available Until: July 2020
    Automotive World/FEV

    In an effort to reduce the development cost and lead time of various advanced technologies like autonomous driving, connected vehicle services, and powertrain electrification, the utilisation of open source solutions has grown significantly. Developing these technologies with open source solution presents a higher level of risk.

    Go to Webinar

    Adaptive AUTOSAR and a Ready-to-Go Vehicle Run-Time Environment

    Available Until: July 2020
    SAE/ETAS

    Adaptive AUTOSAR is an excellent building block for augmenting the solid foundation of the AUTOSAR Classic Platform with support for a flexible, dynamic, high-performance computation environment, but does not (yet) address all the issues that are relevant for the creation of E/E architecture, virtualization, lifecycle, and personalization.

    Go to Webinar

    Revealed: The State of Automotive Software Development in 2019

    Available Until: July 2020
    Automotive IQ/Perforce

    What’s keeping automotive software developers up at night? How much are new trends (like connected/autonomous vehicles) impacting development teams? And how are they managing their work and complying with regulations?

    Go to Webinar

    Developing Higher Density Materials for Lithium-Ion Batteries

    Available Until: July 2020
    SAE/MBRAUN.ThermoFisher Scientific

    Developing better materials for lithium-ion batteries requires a variety of analytical methods and evaluation materials, as well as a better understanding of the mechanisms involved in charge/discharge cycles. This webinar discusses the different analytical techniques used in characterization of battery materials.

    Go to Webinar

    Take the Next Step in Automated Driving with a Comprehensive Development Tool

    Available Until: July 2020
    Automotive World/Elektrobit

    In this webinar will share in-depth insight into the present and future requirements of a sophisticated development environment for automated driving, and how this ties in with Hardware-in-the-Loop simulation and cloud-based validation.

    Go to Webinar

    How to Efficiently Separate Automotive Functions within a Multi-Core System

    Available Until: July 2020
    Automotive World/Elektrobit

    A virtual ECU concept that enables at least two software instances on separated cores, and is a perfect solution for the separation of functions within a multi-core system.

    Go to Webinar

    System-Theoretic Process Analysis (STPA) - Introduction to a New Safety Approach

    Available Until: July 2020
    Automotive World/ Elektrobit

    Many road incidents have occurred due to a lack of consideration for the action states of a system, and this shows that it is not enough to consider reliability purely on a component level; the interaction between each individual component must also be considered.

    Go to Webinar

    How 5G and C-V2X is Creating a Smarter, More Connected Car Experience

    Available Until: July 2020
    Automotive World/Qualcomm

    The automotive industry is going through an unprecedented period. The foundational technologies and user experiences that have made the smartphone the largest technology platform in human history are now enabling innovation across almost every sector, and automotive is no exception.

    Go to Webinar

    Engineered Materials a Reliable Answer to EV Battery Thermal Sensitivity

    Available Until: July 2020
    Automotive IQ/Hutchinson

    Making a battery compartment insensitive to outside temperatures is a simple way to restore a significant energy capacity. Testing and demonstration show that a full pack insulation does not require higher performance liquid cooling and/or bigger heat pump.

    Go to Webinar

    How to Make More Efficient Electrified Vehicles through Simulation

    Available Until: June 2020
    Automotive World/AVL

    PHEVs, are characterised by energy conversions and multiple energy sources: purely electrical or combined driving, recuperative or dissipative braking etc. This webinar discusses how to optimise the energy consumption of the entire system, while respecting the individual demands of performance and drivability.

    Go to Webinar

    How to Optimise Thermal Management for Battery Electric Vehicles

    Available Until: June 2020
    Automotive World/AVL

    Fast charging scenarios lead to huge heat rejections, which need to be efficiently extracted from the thermal system. There is a gap between simulation and testing for thermal management. To frontload thermal management tasks on testbeds requires dynamic conditioning units and accurate simulation models.

    Go to Webinar

    How to Achieve the Next Steps in Engine Efficiency for Hybrid Vehicles

    Available Until: June 2020
    Automotive World/Ricardo

    A new range of technology building blocks become available from powertrain hybridisation, and can be effectively combined by 1-D and 3-D analysis to maximise their contribution.

    Go to Webinar

    Checking All Boxes for Safe, Secure, and Functional Automotive Software

    Available Until: June 2020
    dSpace/OpenSystems Media

    The emergence of the software-defined vehicle - and all the code that comes with it - implies an increase in engineering requirements. Developers now face functional and safety requirements in addition to security provisions that will protect connected cars.

    Go to Webinar

    Simulation for Testing and Analysis of Autonomous Vehicles

    Available Until: June 2020
    SAE/Siemens/Rohde&Schwarz/National Instruments/FLIR/intertek

    With the spate of public highway accidents of autonomous vehicles, the conversation has become more intense regarding the need for simulation testing to reduce risky on-road testing and – more important – to accumulate the billions of miles said to be needed to develop robust vehicle software and operating systems.

    Go to Webinar

    How Automakers can Streamline Development of Connected Services

    Available Until: June 2020
    Automotive News/HERE Technologies

    Build and grow connected service portfolios while reducing development expenditure and time-to-market. Get started with off-the-shelf services. Take advantage of ‘navigation as a platform’ when developing connected services. Work with third parties to build unique services and deliver ready-to-use functionality.

    Go to Webinar

    Modeling Capacity Fade of Lithium-Ion Cells

    Available Until: June 2020
    Charged/COMSOL

    This presentation will focus on the development of the equations used to produce a physics-based model of a lithium-ion cell that includes capacity fade due to the formation of the solid-electrolyte interface (SEI) and lithium metal plating on the anode.

    Go to Webinar

    How to Efficiently Separate Automotive Functions within a Multi-Core System

    Available Until: June 2020
    Automotive World/Elektrobit

    The separation of functional components within one ECU must be guaranteed, and can be enabled via a multi-core system. Additionally, the interaction of safety requirements must be considered and applied.

    Go to Webinar

    How Location Intelligence is Shaping the Future of Mobility

    Available Until: June 2020
    Automotive World/HERE

    New mobility providers are targeting global coverage, yet many are still on the journey toward profitability. Technology for efficient fleet management and trip planning can support the growth of these organisations by helping them reduce costs and improve operational efficiency in the near-term.

    Go to Webinar

    Developing Safe and Secure Autonomous Vehicles Across Industries

    Available Until: May 2020
    SAE/ANSYS

    Autonomous systems can only be released to the public after developers have demonstrated their ability to achieve adequately high levels of safety. This webinar discusses how to design, validate, and test your autonomous vehicle safely.

    Go to Webinar

    DC Fast Charging: A Thermal Challenge

    Available Until: May 2020
    SAE/TE Connectivity

    EV powertrains have improved remarkably in recent years to extend range, reduce costs, and improve the driving experience. Faster charging times will drive greater consumer acceptance of full electric vehicles. This webinar focuses on the vehicle-side thermal equation in relation to DC fast charging and looks at the basic elements of the typical thermal interfaces that link the DC fast charging inlet to the vehicle battery.

    Go to Webinar

    The Forgotten Side of Automotive Cybersecurity - Protecting Navigation & Sensors

    Available Until: May 2020
    Automotive iQ/Regulus

    Sensors and Satellite Navigation are the core components of modern ADAS and autonomous navigation systems. However, these systems are highly vulnerable to hacking attacks such as spoofing and jamming.

    Go to Webinar

    OpenVPX Technology: Roadmap to the Future

    Available Until: April 2020
    SAE/VITA/Pentek/Curtiss-Wright Defense Solutions

    VPX specifications have largely been focused at the board level, but there is also a need for considering system-level requirements to improve interoperability and reduce customization, testing, cost, and risk.

    Go to Webinar

    Structural Bonding for Multi-Material Lightweight Vehicles

    Available Until: April 2020
    Center for Automotive Research

    As the automotive industry develops more lightweight, safe, and affordable car bodies, tehy will depend not only on the availability of lightweight materials and forming technologies, but also on cost-efficient and reliable joining technologies for multi-material design.

    Go to Webinar

    Inertial Navigation for ADAS

    Available Until: April 2020
    Autonomous Vehicle Technology/muRata

    The role of advanced driver assistance systems (ADAS) in the automotive sector is growing, not least because of their importance to future connected and autonomous vehicles. In this webinar, we look at the five stages of ADAS to reach full autonomy in automotive applications and the benefits that inertial navigation can provide to these systems.

    Go to Webinar

    Integrating Autonomous Vehicles with Public Transport

    Available Until: April 2020
    Bestmile

    Learn how to successfully integrate new mobility services into public transit networks, and how to design and integrate new mobility services into public transit networks with examples from real-world deployments.

    Go to Webinar

    How to Train Automotive AI Faster

    Available Until: April 2020
    Automotive World/Pure Storage

    Significant progress is being made in improving the real-time inference accuracy of a car through advanced sensor technologies such as LiDAR. However, rapidly developing complex neural networks in a GPU-powered datacenter before deploying them in a car remains a significant challenge for automotive companies.

    Go to Webinar

    Advances for Autonomous-Vehicle Sensing

    Available Until: March 2020
    SAE/Teledyne/Tektronix/Siemens
    Coilcraft/FLIR/Radiant

    Explores the latest advances in Lidar, radar, and camera-vision systems and discusses what they can do to speed the adoption of high-level vehicle automation.

    Go to Webinar

    Mastering Virtual Fuel Cell Vehicle Development - from Component to System Level

    Available Until: March 2020
    Automotive World/AVL

    OEMs and suppliers that succeed in quickly bringing to market the required components and systems for fuel cell vehicles are well placed to play a leading role in future mobility. A scalable and integrated simulation approach known as ‘frontloading’ is key to accelerating the development process.

    Go to Webinar

    Testing and Inspecting 3D-Printed Parts

    Available Until: March 2020
    SAE/Tech Briefs Media

    As 3D printing becomes more commonplace, parts will require more advanced inspection, processing, and testing to ensure they meet requirements for structural strength and stability. Whether plastic or metal, 3D-printed production parts will be tasked with performing comparably to traditionally manufactured parts in certain applications.

    Go to Webinar

    Design and Simulation of an Inverter Power Module for Electric Vehicles

    Available Until: March 2020
    SAE/Dassault Systemes

    Discusses the challenges of the high voltage and current ratings at which the power electronics need to operate, together with fast switching speeds, pose significant design challenges including thermal management, EMC compliance, circuit protection, and reliability.

    Go to Webinar

    Automotive Cybersecurity — Protecting the Car from the Cloud

    Available Until: March 2020
    Automotive World/Upstream

    Cyber security strategies for securing connected vehicles have traditionally focused on the security of vehicle internals. However, an innovative new approach – Cloud-based security – offers agent-less, backwards compatible and instantly deployable protection.

    Go to Webinar

    The Autonomous Vehicle Future: Opportunities and Challenges

    Available Until: February 2020
    Autonomous Vehicle Technology/dSPACE

    The industry is looking to save lives, reduce injuries, and spread mobility equitably. We can do this by addressing the major challenges of systems engineering and design streamlining, cost reduction, sensor improvements, implementation of more artificial intelligence, and education of the end consumer.

    Go to Webinar

    Solutions for Digial Battery Engineering

    Available Until: February 2020
    SAE/Dassault Systemes

    This webinar provides an overview of solutions for digital battery engineering and dives into specific applications on topics such as coupled thermal-electric-displacement analysis, charging-induced expansion, ultrasonic welding analysis, and general structural analysis.

    Go to Webinar

    Automated and Connected Commercial Vehicles: Next Steps for 'Hands-Off' Operation

    Available Until: February 2020
    SAE/dSPACE/Kontron/Aras/FLIR/Boker's/Thomas

    Explores how we get from advanced driver-assistance systems and wireless connectivity, which enable platooning formations and remote-control operation, to Level 4 / 5 autonomous vehicles, to the “holy grail” of Level 5 autonomous vehicles.

    Go to Webinar

    On-Board Diagnostic Technology Discussion from Renowned Industry Experts

    Available Until: January 2020
    SAE/GM

    Join SAE International and a distinguished panel of onboard diagnostic experts for a free one-hour webcast focusing on the hottest topics in the OBD industry. This dynamic conversation will include John Van Gilder and Andrew Zettel, both from General Motors Co.

    Go to Webinar

    Are You Ready to Leverage Virtual Powertrain Electrification?

    Available Until: January 2020
    Automotive World/AVL

    Simulation solutions to support engineering tasks during the electrification process to achieve short time-to-market. Including concept, layout analysis, optimisation and integration tasks from system level to 3D component analysis.

    Go to Webinar

    The Complexities of Data Ingestion for Autonomous Vehicle Development

    Available Until: December 2019
    Automotive World/Elektrobit

    Discusses the complex technical and practical aspects of ingesting such large amounts of data to the development environment, with a special focus on how to overcome these challenges for successful development, testing, and validation.

    Go to Webinar

    Solution for Rapid Emissions Testing for Vehicles and Components

    Available Until: December 2019
    SAE/Syft

    Regulators and consumers are demanding lower levels of harmful volatile emissions in motor vehicle passenger cabins, pushing manufacturers toward more comprehensive testing. This requires a more agile analytical solution, Selected Ion Flow Tube Mass Spectrometry.

    Go to Webinar

    Reducing Development Time for Machine Control Systems

    Available Until: December 2019
    SAE/Danfoss Power Solutions

    Use a powerful programming environment to increase engineering productivity and help you bring high-performing, intelligent vehicles to market faster. Specifically in regard to machine control systems, use a library of drag-and-drop visual blocks that significantly reduce the amount of time it takes to complete system and subsystem design work.

    Go to Webinar

    Measuring Head-Up Displays from 2D to AR: System Benefits & Demonstration

    Available Until: November 2019
    Automotive IQ/Radiant

    Already introduced in several new vehicles, head-up display (HUD) technology is evolving rapidly. With the rise of virtual and augmented reality (VR, AR) in consumer electronics, user expectations regarding projection and holographic displays have set a high bar for HUD design and quality.

    Go to Webinar

    How to Attract Tech Talent to the Automotive Industry

    Available Until: November 2019
    Automotive World/Continental

    According to global consultancy AlixPartners, approximately 5,000 software and electronics positions in the auto industry went unfilled in the US during 2017. Leading technology and automotive companies are not only racing to develop autonomous vehicles; they are also racing to hire top talent.

    Go to Webinar

    State-of-the-Art Electric Drive Testing and the Components for Advanced Power Analysis

    Available Until: November 2019
    Charged/HBM

    HBM eDrive Testing acts as both a power analyzer and data acquisition system. It has the ability to record all signals along the drive train with a single instrument. This greatly reduces the test complexity and results in synchronous measurement of all parameters.

    Go to Webinar

    Fuel Cell Cars — the Holy Grail for Future Mobility or Just a Placebo?

    Available Until: November 2019
    Automotive World/AVL

    Considering the vast range of alternative powertrains that are being developed today, the role of the fuel cell electric vehicle is coming into question. Is it a viable competitor to other zero emission alternatives such as battery electric vehicles, or will it fail to grab hold of the market?

    Go to Webinar

    Virtual Hardware ECUs: A Positive Disruption for Automotive Software Development

    Available Until: November 2019
    SAE/Synopsys

    Disrupting the current development process is necessary to leverage the latest computing platform. It’s important to start early by removing the dependency on hardware availability and to scale the development environment for better and more efficient software integration and test.

    Go to Webinar

    The Critical Role of Sensors in Autonomous Vehicles

    Available Until: November 2019
    SAE/HELLA/dSPACE/Siemens

    Sensors and actuators play a critical role in self-driving vehicles, controlling both the driving and safety aspects of the car. This webinar looks at the function of various types of sensors and which types of sensors are suited for each function.

    Go to Webinar

    Three Ways Thermal Cameras Make Autonomous Vehicles Safer

    Available Until: November 2019
    SAE/FLIR

    This webinar discusses thermal, or longwave infrared (LWIR), cameras that can be quickly integrated for testing and reliably classify objects in darkness. The cameras see 4x farther than headlights, through most fog, and are unaffected by sun glare.

    Go to Webinar

    Next-Generation Technologies and Materials for Advanced Mobility Applications

    Available Until: November 2019
    SAE/Freudenberg-NOK Sealing Technologies

    E-mobility has created new challenges in thermal management, power efficiency, friction reduction, weight reduction, etc. Smart materials, changes in shielding and elastomers, have enabled technology and solutions to bridge the gap between current and next-generation vehicles.

    Go to Webinar

    Optimising Hybrid Vehicles in a World of Increasing Powertrain Complexity

    Available Until: November 2019
    Automotive World/Ricardo

    Powertrain architecture decisions requires a system level optimisation approach to capture the interactions between conflicting attributes and reduce product development time and cost.

    Go to Webinar

    From Concept to Post-Production: Functional Safety Vital for Intelligent Vehicles

    Available Until: November 2019
    Automotive World/FEV

    This webinar discusses how the firm’s Smart Vehicle and functional safety system knowledge can guide engineers through the various Smart Vehicle lifecycle challenges.

    Go to Webinar

    top